Guide
Improving energy data coverage for GRESB
GRESB scores energy data coverage asset by asset, using both the floor area and the time your data covers, and it scores landlord-controlled and tenant-controlled space separately. This guide explains how coverage is measured, what GRESB allows when data is missing, and how to collect energy data across a portfolio so more of it counts.
How GRESB measures energy data coverage
According to GRESB’s guide for the 2026 Real Estate Assessment, data coverage is calculated for each asset using both floor area and time. Operational energy data coverage is worth 8.5 points. Landlord-controlled space and tenant-controlled space each earn their own score, benchmarked against assets of the same property sub-type and country.
If you report at Base Building and Tenant Spaces level, base building coverage is weighted 40% and tenant space coverage 60%. Reporting at Whole Building level does not use that weighting. For full time coverage, the period your data covers needs to match how long you owned the asset during the reporting year.
Where coverage is usually lost
In practice, area coverage drops when a meter does not cover all of the lettable space, when tenant areas are not metered or tenants do not share their data, or when floor areas and meters do not line up. Time coverage drops when a meter was installed part way through the year, a meter stopped reporting, bills have gaps, or an asset was acquired and the previous owner’s data was never obtained. Finding these early is cheaper than finding them during submission.
What GRESB allows when data is missing
GRESB expects actual, non-estimated data. Estimation is only for when actual data is partly unavailable, and it has limits. Estimated data must not exceed 20% of the total period for which actual data is available, and it is capped at three months across the two reporting years. The actual data you use must cover the same utility type and the same area type as the data you are estimating.
GRESB does not allow prior-year data to be used to estimate a year with no actual data, or estimates based on aggregated floor area, averages across assets or national benchmarks. If you estimate, you disclose the method, the proportion estimated and the reason in the open text box under the indicator table. If you cannot comply with the rules, you report 0% coverage for that data type.
Landlord and tenant data
GRESB asks you to report tenant-controlled coverage and consumption where it is available. Missing tenant data lowers the tenant-controlled coverage score, but because each control type is scored and benchmarked separately, you are compared with similar assets facing the same constraint. Where you know the split between base building and tenant space, report at Base Building and Tenant Spaces level, and use Whole Building only if you do not.
In practice, agree data sharing with tenants early, for example in lease or green lease wording, ask for supplier bills or smart meter data, and consider sub-metering tenant space you control.
Collecting energy data across a portfolio
1. Build a meter register. List every meter and supply for each asset, the floor area it covers and who controls that space.
2. Confirm ownership periods. Note the dates you owned each asset, and what data you can get for acquisitions and disposals.
3. Collect actual data for the whole year. Use meter reads or interval data, and check any bill marked as estimated against a meter read.
4. Find gaps early. Check whether each gap fits within GRESB’s estimation limits before you rely on estimating it.
5. Keep the same reporting level. For like-for-like, GRESB looks for data across the full year (355 days or more), similar coverage in both years, a Standing Investment status and the same reporting level as the previous year.
6. Keep an audit trail. Record where each figure came from, so you can explain it later.
Assets also need at least 75% energy data coverage, measured by area and time, to be eligible for the energy efficiency calculation. Below 100%, GRESB extrapolates consumption to 100% for intensity.
Why estimated bills are not a safe fallback
How metered data feeds your GRESB submission
GRESB collects asset-level data through its Asset Portal. Continuous metering on a monitoring platform gives you the annual total for each meter, split by landlord and tenant areas where you meter them, and keeps the daily record behind each total. That makes it quicker to answer questions about gaps and to support your figures. If you want to automate how data moves from your platform into your submission,
talk to us.
Common questions
Answered.
Can I estimate missing energy data for GRESB?
Only within limits. Estimated data must not exceed 20% of the period for which you have actual data, it is capped at three months across the two reporting years, and you must disclose the method, proportion and reason. If you cannot meet the rules, you report 0% coverage for that data type.
What if tenants will not share their data?
You report tenant-controlled coverage where it is available. Missing tenant data lowers that coverage score, but it is scored and benchmarked separately from landlord-controlled space.
Is there a minimum coverage?
For the energy efficiency calculation, assets need at least 75% energy data coverage, measured by area and time. More complete coverage also scores better for data coverage itself.
Do I report at Whole Building or Base Building and Tenant Spaces level?
Where you know the split between base building and tenant space, report at Base Building and Tenant Spaces level. Use Whole Building only if the split is unknown, and keep the same level from year to year for like-for-like.
See where you stand.
The checker is free and shows you what is in place, what is missing and where to start.
This page is general information, not GRESB guidance or advice on your submission. Always check the current GRESB guide. Monitor Hut is not affiliated with GRESB. Checked against the GRESB 2026 Real Estate Assessment guide in October 2026.